datasheet www.rohm.com ? 2013 rohm co., ltd. all rights reserved. 2SAR562F3 pnp -6a -30v middle power transistor l outline huml2020l3 l features 1) suitable for middle power driver 2) low v ce(sat) v ce(sat) = - 300mv(max.) (i c /i b = - 3a/ - 60ma) 3) high collector current i c = - 6a (max) , i cp = - 7a (max) 4) leadless small smd package "huml2020l3" excellent thermal and electrical conductivity 5) lead free/rohs compliant. l inner circuit l applications load switch, battery-driven devices, power management charging circuits, power switches (e.g. motors, fans) l packaging specifications tape width (mm) 2SAR562F3 huml2020l3 2020 tr 180 8 part no. package taping code reel size (mm) 3,000 mt basic ordering unit (pcs) marking i c - 6a parameter value v ceo - 30v package size (mm) 2SAR562F3 base emitter collector emitter base collector base emitter collector 1/6 2013.05 - rev.a downloaded from: http:///
www.rohm.com ? 2013 rohm co., ltd. all rights reserved. data sheet 2SAR562F3 l absolute maximum ratings (ta = 25c) collector-base voltage collector-emitter voltage emitter-base voltage dc pulsed base current junction temperature range of storage temperature *1 pw=1ms , single pulse *2 mounted on an fr4 board (25.425.41.6mm , 645mm 2 cu pad) *3 pw=10s , mounted on an fr4 board (25.425.41.6mm , 645mm 2 cu pad) l electrical characteristics (ta = 25c) collector-base breakdown voltage bv cbo i c = - 100 m a - 30 - 150 c t stg - v t j collector-emitter breakdown voltage bv ceo i c = - 1ma - 30 - - v parameter symbol conditions min. typ. emitter-base breakdown voltage bv ebo i e = - 100 m a - 6 - - v - 0.5 m a emitter cut-off current i ebo v eb = - 4v - - - 0.5 m a collector cut-off current i cbo v cb = - 20v - - output capacitance c ob v cb = - 10v, i e = 0a f = 1mhz - 75 - pf transition frequency f t v ce = - 10v, i e = 200ma f=100mh z - 180 - 300 mv collector-emitter saturation voltage v ce(sat) i c = - 3a, i b = - 60ma - - 160 - mhz - 500 - 200 v ce = - 2v, i c = - 500ma h fe dc current gain base-emitter saturation voltage v be(sat) i c = - 3a, i b = - 60ma - - 0.9 - 1.2 v max. unit 1.0 w 2.1 w v ceo - 30 v v ebo i cp *1 - 7.0 a - 6 v - 55 to + 150 c i c - 6.0 a p d *2 p d *3 parameter symbol values unit v cbo - 30 v power dissipation collector current i b - 0.6 a 2/6 2013.05 - rev.a downloaded from: http:///
www.rohm.com ? 2013 rohm co., ltd. all rights reserved. data sheet 2SAR562F3 l electrical characteristic curves (ta = 25c) -1 -10 -100 -1000 -10000 -0 -0.5 -1 -1.5 ta=125oc 75oc 25oc - 40 oc v ce = - 2v pulsed -0 -0.2 -0.4 -0.6 -0.8 -1 -0 -0.2 -0.4 -0.6 -0.8 - 1.0ma - 1.5ma - 2.0ma - 3.0ma - 4.0ma - 4.5ma - 2.5ma i b = - 0.5ma ta=25oc - 5.0ma - 3.5ma 10 100 1000 -1 -10 -100 -1000 -10000 v ce = - 2v pulsed ta=125oc 75oc 25oc - 40 oc 10 100 1000 -1 -10 -100 -1000 -10000 v ce = - 5v - 2v ta=25oc pulsed colector to emitte voltage : v ce [v] fig.1 ground emitter propagation characteristics collector current : i c [ma] base to emitter voltage : v be [v] fig.2 typical output characteristics fig.3 dc current gain vs. collector current (i) dc current gain : h fe collector current : i c [ma] fig.4 dc current gain vs. collector current (ii) dc current gain : h fe collector current : i c [ma] collector current : i c [a] 3/6 2013.05 - rev.a downloaded from: http:///
www.rohm.com ? 2013 rohm co., ltd. all rights reserved. data sheet 2SAR562F3 l electrical characteristic curves (ta = 25c) -0.001 -0.01 -0.1 -1 -1 -10 -100 -1000 -10000 i c / i b = 20 ta=125oc 75oc 25oc - 40 oc -0.1 -1 -10 -1 -10 -100 -1000 -10000 i c / i b = 50 pulsed ta= - 40 oc 25oc 75oc 125oc -0.001 -0.01 -0.1 -1 -1 -10 -100 -1000 -10000 ta=25oc i c / i b =50/1 20/1 10/1 10 100 1000 1 10 100 1000 ta=25oc v ce = - 10v f=100mhz fig.5 collector-emitter saturation voltage vs. collector current (i) collector-emitter saturation voltage : v ce(sat) [v] collector current : i c [ma] fig.6 collector-emitter saturation voltage vs. collector current (ii) collector-emitter saturation voltage : v ce(sat) [v] collector current : i c [ma] fig.7 base-emitter saturation voltage vs. collector current base -emitter saturation voltage : v be(sat) [v] collector current : i c [ma] fig.8 gain bandwidth product vs. emitter current transition frequency : f t [mhz] emitter current :i e [ma] 4/6 2013.05 - rev.a downloaded from: http:///
www.rohm.com ? 2013 rohm co., ltd. all rights reserved. data sheet 2SAR562F3 l electrical characteristic curves (ta = 25c) 10 100 1000 -0.1 -1 -10 -100 ta=25oc f=1mhz i c =0a c ob c ib -0.01 -0.1 -1 -10 -0.1 -1 -10 -100 ta=25oc single non repetitive pulse. 100ms 10ms 1ms dc fig.9 emitter input capacitance vs. emitter-base voltage collector output capacitance vs. collector-base voltage collector output capacitance : cob [pf] emitter input capacitance : cib [pf] collector - base voltage : v cb [v] emitter - base voltage : v eb [v] fig.10 safe operating area collector current : i c [a] collector to emitter voltage : v ce [v] 5/6 2013.05 - rev.a downloaded from: http:///
2SAR562F3 l dimensions (unit : mm) dimension in mm / inches huml2020l3 pattern of terminal position areas [not a recommended pattern of soldering pads] min max min max a 0.55 0.65 0.022 0.026 a1 0.00 0.05 0.000 0.002 b 0.25 0.35 0.010 0.014 b1 1.40 1.60 0.055 0.063 d 1.90 2.10 0.075 0.083 e 1.90 2.10 0.075 0.083 e lp 0.35 0.45 0.014 0.018 lp1lp2 0.90 1.10 0.035 0.043 lp3 0.70 0.80 0.028 0.031 x - 0.10 - 0.004 y - 0.10 - 0.004 min max min max b2 - 0.45 - 0.018 b3 - 1.60 - 0.063 l1 - 0.55 - 0.022 l2l3 - 1.10 - 0.043 l4 - 0.80 - 0.031 0.25 ref 0.01 ref dim milimeters inches 1.30 0.051 0.25 ref 0.01 ref dim milimeters inches 6/6 2013.05 - rev.a downloaded from: http:/// www.rohm.com ? 2013 rohm co., ltd. all rights reserved. data sheet
r1102 a www.rohm.com ? 2013 rohm co., ltd. all rights reserved. notice rohm customer support system http://www.rohm.com/contact/ thank you for your accessing to rohm product informations. more detail product informations and catalogs are available, please contact us. notes the information contained herein is subject to change without notice. before you use our products, please contact our sales representativ e and verify the latest specifica- tions : although rohm is continuously working to improve product reliability and quality, semicon- ductors can break down and malfunction due to various factors. therefore, in order to prevent personal injury or fire arising from failure, please take safety measures such as complying with the derating characteristics, implementing redundant and fire prevention designs, and utilizing backups and fail-safe procedures. rohm shall have no responsibility for any damages arising out of the use of our poducts beyond the rating specified by rohm. examples of application circuits, circuit constants and any other information contained herein are provided only to illustrate the standard usage and operations of the products. the peripheral conditions must be taken into account when designing circuits for mass production. the technical information specified herein is intended only to show the typical functions of and examples of application circuits for the products. rohm does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by rohm or any other parties. rohm shall have no responsibility whatsoever for any dispute arising out of the use of such technical information. the products are intended for use in general electronic equipment (i.e. av/oa devices, communi- cation, consumer systems, gaming/entertainment sets) as well as the applications indicated in this document. the products specified in this document are not designed to be radiation tolerant. for use of our products in applications requiring a high degree of reliability (as exemplified below), please contact and consult with a rohm representative : transportation equipment (i.e. cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety equipment, medical systems, servers, solar cells, and power transmission systems. do not use our products in applications requiring extremely high reliability, such as aerospace equipment, nuclear power control systems, and submarine repeaters. rohm shall have no responsibility for any damages or injury arising from non-compliance with the recommended usage conditions and specifications contained herein. rohm has used reasonable care to ensur the accuracy of the information contained in this document. however, rohm does not warrants that such information is error-free, and rohm shall have no responsibility for any damages arising from any inaccuracy or misprint of such information. please use the products in accordance with any applicable environmental laws and regulations, such as the rohs directive. for more details, including rohs compatibility, please contact a rohm sales office. rohm shall have no responsibility for any damages or losses resulting non-compliance with any applicable laws or regulations. when providing our products and technologies contained in this document to other countries, you must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the us export administration regulations and the foreign exchange and foreign trade act. this document, in part or in whole, may not be reprinted or reproduced without prior consent of rohm. 1) 2) 3) 4) 5) 6) 7) 8) 9) 10)11) 12) 13) 14) downloaded from: http:///
|
